Micro Digital Satellite Receiver User Manual download pdf (Page 4)

S1812 Micro Satellite Receiver

SS VV

Quality

Digital

Products

Quick Satellite Alignment Tip

Set the elevation of your satellite dish to the correct elevation for

your location. (this changes across NZ)

Approx 35 Degrees Invercargill , 38 Degrees Christchurch ,

40 Degrees Wellington , 45 Degrees Auckland.

Refer to your charts or use the built in guide.

Start with your dish facing NORTH, and very slowly pan towards

the WEST (Left) until you have signal and quality as per above

section. (fig 11)

Tips, Make sure your mount is perfectly straight and there is nothing

between you and the satellite. ie no trees or buildings,

Built in Guide for Finding Elevation

The S1812 has a built in guide to find the best elevation for your area.

Press ‘MENU’ on the remote, and select the ‘TOOLS’ menu.

Here you can enter the satellite guide screen.

Enter your longitude reading, and your latitude reading,

Then enter 160.00 for the Satellite (Optus D1)

Highlight ‘START and press ‘OK’, this will then give you your elevation value.

The orientation as shown on the screen is for the northern

hemisphere only, for New Zealand it is the mirror image of that shown,

When done press ‘MENU’ to Exit. (fig 14)

Factory Default

If the need arises where you are advised to factory default the S1812.

Then you do this under the ‘System Menu’, highlight ‘Default Value’ and press

‘OK’, Select ‘OK’ when asked to Load default value.

This will now return the S1812 back to its factory default settings.

NOTE:

After you default the S1812 it will return the LNB setting back to 10750

Calendar

You can access a CALENDAR feature by going to the ‘TOOLS’ menu.

Use the arrow keys to select different days, to change month highlight the

month and use up / down buttons to change.

Calculator

By accessing the ‘TOOLS’ menu there is also a calculator.

Use arrow buttons to select numbers and + - = etc as per a normal calculator

Press ‘MENU’ to exit.

Multi Picture,

By pressing the ‘GREEN’ (multi picture) button on the remote you can flick

between different channels by just using your remote control arrow buttons.

RADIO,

By pressing the ‘TV/RADIO’ (labeled ) button this will switch you

between TV channels and digital radio channels.

(fig 14)

WWW.STARVIEW.CO.NZ

1 2 3 4

Comments to this Manuals

No comments

Micro Digital Satellite Receiver User Manual Page 4

Comments to this Manuals