S1812 Micro Satellite Receiver
SS VV
Quality
Digital
Products
Once you power the S1812 up. Go to the correct AV channel on your TV, you should be able to see the television channel
running, if you don’t and you have a no signal message on the screen, then you may have to change your LNB freq.
If you have no pictures and no on screen display you may not have your connections correct or may not be on the correct
AV channel. Please refer to your television manual on how to connect AV cables and select AV channels.
If you have the No Signal (fig 3) and your connection to the satellite dish is correct - then you may have to change the
LNB Frequency
The receiver unit on the end of a satellite dish is called an LNB
This converts the signal from the satellite to a signal you can send
down coax cable to the satellite receiver.
There are 2 main LNB's used in New Zealand. 11300 & 10750
The S1812 has been pre-programed for use with the 10750 LNB.
This is compatible with the dual & quad LNB system’s currently being
installed by SKY Television.
Most installations and satellite dish’s are now using the 10750 LNB
(also labeled 10.75).
This number will be printed on all quality LNB's.
If you have an older style of LNB it may be a 11300 (or 11.3) then you
will just have to change the LNB setting in the S1812 to get signal.
NOTE: If you have pictures or a 10750 LNB then you do NOT need to
adjust this setting.
To change LNB Frequency.
Press 'MENU' button on the remote control.
Select Satellite Menu using the left and right buttons.
On the satellite menu select ‘Edit Satellite’ and press ‘OK’
Highlight ‘Freq1 <10750>’ and press the right arrow button , this will
change the ‘Freq1 to 11300’
Then press 'EXIT' button 2 times to exit.
LNB Frequency’s - a quick overview and how to change
(fig 3)
(fig 4)
(fig 5)
(fig 6)
LNB Type should be STANDARD
Note
Automatic search for channels
To search for new channels on Freeview or from other providers there
is an auto search function.
Press ‘MENU’ on the remote and use the arrow buttons to select
the ‘Satellite’ menu as per (fig 4) Now highlight ‘Auto Scan’ and
press the ‘OK’ button or (press the ‘AUTOSCAN’ button on the remote).
Highlight ‘Search <Free>’ then press ‘OK’ button (fig 7)
This will now search for any free to view channels available on the
selected satellite.
This may take a couple of minutes, once new channels have been
found press ‘OK’ to save
Press ‘EXIT’ twice to exit and watch TV again.
NOTE: , When you do an auto scan the receiver may find
temporary channels or feeds - these channels may only work on a
satellite for hours or days, just enjoy these channels while they
are working, only the Freeview channels are full time channels.
(fig 7)
(fig 8)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals