Micro Digital Satellite Receiver User Manual download pdf (Page 3)

S1812 Micro Satellite Receiver

SS VV

Quality

Digital

Products

(fig 9)

(fig 10)

(fig 11)

(fig 12)

(fig 13)

Move Channels

If you would like to move the channels into a different order.

While watching TV press the ‘OK’ button on the remote, this will bring

up the current channel list. Highlight the channel you wish to move,

ie STRATOS then press ‘2’ on the remote.

Now move the channel up or down using the arrow buttons on the

remote.

When you have the channel where you want it press ‘2’ on the

remote again and the channel will lock into place

Press ‘Exit’ when you have finished moving channels.

Delete Channel

As per Move Channel, use the same method but press the ‘1’ button

on the remote this will select the channel ready for deletion.

Once you have selected all the channels you wish to delete press

‘MENU’ on the remote and choose ‘OK’ to save.

- the channel/s you marked will now be deleted.

Satellite Finder Function

Press the ‘INFO’ button on the remote control.

This will bring up the satellite finder function

- This is to help you align your satellite dish.

On this screen you will get Signal Intensity bars , Signal Quality Bars

,Tuner Status etc,

SIGNAL INTENSITY:

This is the strength of the satellite signal being received

all satellite dishes will give a level of signal even if you are not

aligned to the satellite.

So this bar should be giving you a reading if connected to a satellite

dish correctly. (fig 12)

If you have an empty signal intensity then you may have a

connection problem or a faulty LNB (fig 13)

SIGNAL QUALITY:

Once you align onto the correct satellite your signal quality will

increase and the Signal Status will become ‘Locked’ . (Fig 11)

Now all you have to do is get the highest Signal Quality by peaking

your satellite dish (refer to your dish instructions on how to do this)

Then enjoy Digital TV.

BER: -Bit Error Rate

Note: a poorly aligned dish will give low Intensity & Quality, you will

also get errors in the data which will be shown by bad pictures or the

BER value will be greater than 0/1000000 , if this BER is greater >0

then you may have to check the alignment of your satellite dish

Dish aligned and working correctly

LNB / Dish connected but not aligned to correct satellite

LNB / Dish not connected or cable - LNB fault

1 2 3 4

Comments to this Manuals

No comments

Micro Digital Satellite Receiver User Manual Page 3

Comments to this Manuals